基于中空多孔金纳米/石墨烯复合纳米材料的葡萄糖氧化酶直接电化学及其生物传感研究

采用溶液相牺牲模板法制备中空多孔金纳米粒子（HPAuNPs）,并将该材料与还原氧化石墨烯（rGO）复合,用于葡萄糖氧化酶（GOx）在玻碳电极（GCE）表面的有效固定,构建GOx/HPAuNPs/rGO/GCE传感界面。利用扫描和透射电镜、X射线光电子能谱、X射线衍射谱、红外光谱及电化学等方法对材料的形貌与结构,GOx的固定化过程,以及传感器的直接电化学和电催化性能进行表征。结果表明,HPAuNPs和rGO的协同作用能有效促进GOx与电极之间的直接电子转移（DET）。基于GOx/HPAuNPs/rGO/GCE对葡萄糖的良好电催化性能,该方法有效实现了对葡萄糖的高灵敏度检测,其电流响应的线性范围为0.05～7.0 mmol/L,检出限（S/N=3）为16μmol/L。该传感器具有良好的选择性、重现性及稳定性,对实际样品血清中血糖的测定结果令人满意,回收率为98.0%～103%,相对标准偏差不大于5.0%。     

Electrochemical Detection of Artemisinin Using Cobalt Sulphide/Reduced Graphene Oxide Nanocomposite

Solvothermally synthesized cobalt sulphide/reduced graphene oxide (CoS/rGO) was used to fabricate an electrochemical sensor for detection of artemisinin. Microscopic techniques were used to characterize CoS/rGO nanocomposite. The electrochemical sensor was fabricated by modifying the surface of glassy carbon electrode with CoS/rGO nanocomposite. [Fe(CN)6]^3−/4− was used as a mediator to aid oxidation of artemisinin. Differential pulse voltammetric technique was used for the detection of artemisinin. A linear range of 30–100 μM was used. Experimentally, a detection limit of 0.5 μM was obtained. Therefore, the developed sensor can be used for quality control of artemisinin.     

Enhanced Electrochemical Response of Isoniazid Electrocatalytic Oxidation on RGO-PPD-SiW Modified Electrode

The electroactive composites based on reduced graphene oxide (RGO), poly-o-phenylenediamine (PPD) and heteropolyacids – H₄SiW₁₂O₄₀nH₂O (SiW) and H₃[PW₁₂O₄₀] ⋅ nH₂O (PW) was applied to a screen-printed carbon electrode (SPCE) as a planar three-electrode cell as the first step to creating various devices, in particular, sensors and catalysts. We studied potential use of the modified and unmodified SPCE planar electrode in determining the concentration of antitubercular antibiotic isoniazid (isonicotinic acid hydrazide C₆H₇N₃O or INH). The best result was observed for SPCE+RGO-PPD-SiW. CV of normal saline with various concentrations of C₆H₇N₃O demonstrated linear dependence of the relevant anodic peak current either in the bulk solution upon immersion of the modified electrode or in a droplet on the electrode surface.     

计算机辅助设计三聚氰胺分子印迹聚合物

借助密度泛函理论(DFT)长程校正方法,以三聚氰胺(MAM)为印迹分子,甲基丙烯酸(MAA)为功能单体,分别以二甲基丙烯酸乙二醇酯(EGDMA)、三羟甲基丙烷三甲基丙烯酸酯(TRIM)及二乙烯苯(DVB)为交联剂,以乙腈(ACN)、甲醇(MT)、乙醇(EA)、甲苯(TL)、四氢呋喃(THF)及二甲基亚砜(DMSO)为溶剂,模拟了MAM与MAA单体分子印迹聚合物(MIPs)自组装体系的构型,讨论了MAM与MAA的成键作用位点,及其稳定复合物的印迹反应比例及印迹作用机理,依据结合能(△E)优化了交联剂和溶剂,并借助分子中原子理论(AIM)揭示了MAM与MAA印迹作用的本质.计算结果表明,MAM印迹分子三嗪环上的N与胺基上H均通过氢键与MAA单体进行印迹聚合反应,且在印迹反应比例为1∶6,以TL为溶剂时形成的MAM-MAA有序复合物结合能最低,构型最稳定;与TRIM及EGDMA交联剂相比,DVB与MAM结合能最低,更适宜作为MAM-MAA印迹聚合物的交联剂.本研究为MAM-MIPs合成时印迹比例、交联剂及溶剂的选择提供了理论依据.     

聚丙烯酰胺纳米复合水凝胶研究进展

传统化学交联的聚丙烯酰胺(PAM)水凝胶由于力学性能较弱,其应用范围受到很大限制。与之相比,采用纳米复合技术制备的PAM纳米复合(NC)水凝胶,不仅大幅提高了力学性能,而且在溶胀率等方面也有明显的提高。本文结合该领域近年来的研究进展,将PAM NC水凝胶分为纯物理交联和化学物理交联相结合两类,重点讨论了NC水凝胶在力学性能方面的研究结果,对溶胀率等其它方面的性能也进行了综合论述。     

马来酸酐接枝稀土异戊橡胶接枝率的测试方法

以马来酸酐(MAH)和稀土异戊橡胶(IR)聚合液为主要原料,采用溶液接枝改性反应制备了马来酸酐接枝稀土异戊橡胶(IR-g-MAH)。以IR-g-MAH接枝率的测试方法为研究对象,对比直接滴定法和返滴法,并进一步优化直接滴定法的测试条件。实验结果表明,直接滴定法测试的结果准确度高、重复性好,且测试过程简单。其较优的测试条件为:水解试剂为乙醇,样品用量为0.2~0.5g,KOH-乙醇标准溶液浓度为0.02~0.06mol/L。     

Natural and artificial light-harvesting systems utilizing the functions of carotenoids

Carotenoids are essential pigments in natural photosynthesis. They absorb in the blue–green region of the solar spectrum and transfer the absorbed energy to (bacterio-)chlorophylls, and so expand the wavelength range of light that is able to drive photosynthesis. This process is an example of singlet–singlet energy transfer and so carotenoids serve to enhance the overall efficiency of photosynthetic light reactions. Carotenoids also act to protect photosynthetic organisms from the harmful effects of excess exposure to light. In this case, triplet–triplet energy transfer from (bacterio-)chlorophyll to carotenoid plays a key role in this photoprotective reaction. In the light-harvesting pigment–protein complexes from purple photosynthetic bacteria and chlorophytes, carotenoids have an additional role, namely the structural stabilization of those complexes. In this article we review what is currently known about how carotenoids discharge these functions. The molecular architecture of photosynthetic systems will be outlined to provide a basis from which to describe the photochemistry of carotenoids, which underlies most of their important functions in photosynthesis. Then, the possibility to utilize the functions of carotenoids in artificial photosynthetic light-harvesting systems will be discussed. Some examples of the model systems are introduced.     

电化学还原氧化石墨烯用于四环素电催化检测

四环素(TTC)因其广泛的抗菌性和低生产成本等特点而成为应用最广泛的兽医药物. TTC的大量使用不可避免地导致其进入地表水、地下水和污水处理厂.迄今,已有许多方法用于TTC检测,包括免疫测定法、微生物检测法和化学-物理法等.然而,这些方法费用高,耗时长或需要复杂的样品预处理过程,不适合现场测量或常规分析.电化学分析法具有操作简单、成本低廉、选择性和灵敏度较高、易实现在线检测等特点,在检测领域具有重要优势.石墨烯在电化学传感器领域表现出优越的应用性能,但有关石墨烯材料应用于电分析和电催化方面的报道仍然有限.石墨烯的前驱体氧化石墨烯(GO)片层底面上具有各种类型的含氧官能团和层状边缘,导致其绝缘并具有很多缺陷,使GO包含了sp2和sp3杂化碳原子,为GO提供了独特的具有化学功能的异构电子结构.通过对GO进行还原,可以生成新的sp2域或者改变含氧官能团的数量和类型,从而为GO提供更多的特殊性质.研究表明,电化学还原是一种绿色快速的还原方法,可以控制GO的还原程度和还原过程.本文利用电化学还原法来调整GO表面的官能团和缺陷度,利用在–0.8 V还原电位下得到的电化学还原氧化石墨烯(ERGO-0.8V)修饰玻碳电极(GC)为工作电极(GC/ERGO-0.8V),采用循环伏安法对溶解在pH=3的缓冲溶液中的TTC进行电化学检测,发现ERGO-0.8V对TTC具有电催化性能.利用红外光谱(FT-IR)、X射线光电子能谱(XPS)和拉曼光谱对ERGO-0.8V, ERGO-1.2V, GO及化学还原得到的石墨烯(CRGO)表面官能团和缺陷程度进行了表征,考察了TTC在ERGO-0.8V/GC上的电化学行为,对其电催化还原机理进行了推测.结果表明,与GO, ERGO-1.2V及CRGO修饰电极相比, GC/ERGO-0.8V修饰电极的催化还原峰在0–0.5 V,对TTC表现出独特的电催化性能, GC/ERGO-0.8V电极对浓度为0.1–120 mg/L的TTC溶液具有良好的检测性能,在不同浓度范围内其氧化峰峰电流与峰电位的线性关系不同. FT-IR和XPS结果显示,在–0.8 V还原电位下得到的ERGO-0.8V,其官能团类型和数量发生变化,但仍存在大量官能团,主要是羧基、羟基和环氧基.同时,拉曼表征显示ERGO-0.8V的缺陷密度增大,同时新生成的sp2域减小而使得ERGO的sp2域减小.对比GO等其他材料的表征结果推测,官能团变化是影响ERGO独特电催化性质的主要因素,除此之外还有材料的缺陷度和sp2域.推测GC/ERGO-0.8V修饰电极对TTC可能的催化机理为： TTC在GC/ERGO电极上的还原与氢醌和醌之间的转换有关;而对于ERGO,则可能对应于羧基和羟基之间的转化.然而,同样具有羧基和羟基的ERGO-1.2V则对TTC没有产生电催化作用.其原因可能是在–0.8到–1.2 V还原电位下,形成的羧基位于石墨烯片层内部,而片层内的电子传递较慢.     

不同孪晶界密度银纳米线拉伸形变行为的分子动力学模拟

采用分子动力学方法模拟了不同孪晶界密度银纳米线的拉伸形变行为, 分析了孪晶界密度对多晶银纳米线屈服强度、弹性模量和塑性变形机理的影响. 在弹性形变区域, 孪晶界的存在对杨氏模量变化的作用不明显. 在塑性形变阶段, 首先从表面边缘开始产生位错成核, 然后延伸并受阻于孪晶界. 在进一步拉伸载荷作用下, 孪晶界将作为位错源产生新的位错. 模拟结果表明, 银纳米线的强度与孪晶界和晶粒的尺寸有关. 孪晶界密度较小(即晶粒的长径比大于1)时, 此纳米线的屈服应力比单晶纳米线还要小, 只有当孪晶界密度较大时(即晶粒的长径比小于1), 孪晶界使得纳米线得到强化. 综合分析了孪晶界和晶粒尺寸对银纳米线的影响, 为构建高强度金属纳米线打下基础. 最后讨论了温度和拉伸速度对孪晶纳米线屈服应力所产生的影响, 随着温度的升高, 孪晶纳米线与单晶纳米线的屈服应力差先升高后趋于稳定; 当拉伸速度逐渐增大, 孪晶纳米线与单晶纳米线的屈服应力差先稳定后增大.     

Electronic Olfactory Sensor Based on A. mellifera Odorant‐Binding Protein 14 on a Reduced Graphene Oxide Field‐Effect Transistor

An olfactory biosensor based on a reduced graphene oxide (rGO) field‐effect transistor (FET), functionalized by the odorant‐binding protein 14 (OBP14) from the honey bee (Apis mellifera) has been designed for the in situ and real‐time monitoring of a broad spectrum of odorants in aqueous solutions known to be attractants for bees. The electrical measurements of the binding of all tested odorants are shown to follow the Langmuir model for ligand–receptor interactions. The results demonstrate that OBP14 is able to bind odorants even after immobilization on rGO and can discriminate between ligands binding within a range of dissociation constants from K_d=4 μM to K_d=3.3 mM . The strongest ligands, such as homovanillic acid, eugenol, and methyl vanillate all contain a hydroxy group which is apparently important for the strong interaction with the protein.